Product Introduction:
Railway tractor is a special vehicle that can run not only on
railway tracks, but also on general roads and even in the field.
Early use was mainly military. Hyundai mainly undertakes
maintenance, rescue and other emergency tasks along railway lines.
It is required that the road and railway can be converted quickly
and conveniently. It is usually achieved through the hydraulic lane
changing rotary device on the chassis and the railway driving guide
wheel device that can take off and land at any time. With the guide
wheel device, the general rubber tire wheel can run straight along
the rail. Because the vehicle requires a certain amount of traction
and carrying capacity, it can play a unique role in the case of
disruption or blockage of railway lines due to disasters. Special
road and rail vehicles are: electrification traction section
contact line repair vehicle, excavator for mountain railway
emergency repair, as well as emergency tractor, power generation
vehicle, fire truck, rapid bridging vehicle and so on.
First, advantages and characteristics
1, long service life, can be used for more than 10 years;
2, do not need a garage, do not occupy the work site and railway
line.
3, cost-effective, energy saving, environmental protection, noise
reduction.
4, unique technology, low speed large traction;
5, easy to operate, low labor intensity, a slightly trained driver
can operate independently;
6, two-way traction, steering operation can not go through the
switch;
7, maintenance is simple, low failure rate;
8, mobile and flexible, convenient road and railway conversion,
shunting operation time is fast, reduce the truck delay fee;
9, mainly used for railway line aerial operation maintenance, but
also for operation traction;
Ii. Parameters
Models/Projects | HTRR110 (integrated body, steel wheel drive) |
Rated towed tonnage | 1500 |
Vehicle length * width (mm) | 7500/2200 |
Vehicle height (mm) | 3000 |
Coupler height (mm) | 880±10 (customizable) |
Traction mode | Bidirectional traction |
Minimum radius of curvature (m) | 120 |
Minimum turning Radius (m) | 7.5 |
Applicable gauge (mm) | 1000/1435/1520(customizable) |
Traction speed (KM/H) | 0-10 |
Highway speed (KM/H) | 0-20 |
Total body weight KG | ≥26000 |